The Razor®

First, lubricate the area you will be shaving – this will help reduce friction and protect your skin.

Once your skin is prepped and ready, hold The Razor® at an angle between 30 and 45 degrees relative to the surface of the skin. The angled zinc alloy head and weighted handle will help you get a close shave without needing to add extra pressure.

Using short, controlled strokes, shave with the grain, aka the direction of your hair growth. This method should also help you reduce the likelihood of skin irritation.

Each blade for The Plow® 2.0 has two sides, so carefully flip it over once one side starts to clog to start fresh with a new, ultra-sharp cutting edge.

PRO TIP: Start your routine off by getting in a warm shower. This allows your pores to open and your hair to soften. Next, hop out of the shower, towel off, and follow the steps listed above.

We recommend changing the blades every time you shave.

You may think changing the blades each time you shave is excessive, but there are reasons for it:

• A fresh blade gives you optimal shaving performance (think: extreme smoothness).
• It helps reduce razor burn.
• A new blade each time you shave is the most sanitary option because of how easy it is to spread bacteria and germs.

PRO TIP: The Razor® blades are double sided, which allows you to get the most out of each blade.

The Razor® blades are made of premium stainless steel to help reduce razor burn and irritation.

We recommend using a fresh blade every shave for optimal results.

To replace the blade:

• Grip the head of The Razor® (we advise you to use a cloth to prevent slipping) with one hand while holding the handle in the other.
• Using a counterclockwise motion, twist off the handle and place it down safely.
• Using both hands, carefully separate the head, paying careful attention to the sharp edges of the blade.
• Remove the old blade and replace it with a new blade, neatly between the pieces of the head.
• Screw the handle back in carefully.

PRO TIP: The Razor® blades are double sided, which allows you to get the most out of each blade.

As it turns out, razor care is extremely easy (when you have a good razor). All you need is mild soap and water. That’s the secret to cleaning your razor.

Follow these steps to clean and disinfect The Razor® handle properly:

• Step 1 - Plug your sink.
• Step 2 - Start running water into the sink.
• Step 3 - Lather up a bit of soap and make that water soapy.
• Step 4 - Remove the blade from the razor.
• Step 5 - Wash your razor in soapy hot water.
• Step 6 - Unplug the sink and rinse your razor blade so there is no more soapiness.
• Step 7 - Store your razor somewhere dry to help prevent bacteria buildup.

The Razor® comes with one razor blade to get you started.

The Razor® uses a single-blade razor design, but the blade head on the razor is angled. This angle is designed to help minimize ingrown hairs and irritation as a result of shaving.

The Razor®'s single blade was designed to help reduce painful ingrown hairs and uncomfortable razor burn.

To help reduce razor burn, start by always using a sharp, clean razor blade.

With a double-edge razor, like The Razor®, this is really easy. As soon as the blade is the least bit dull or clogged, carefully flip the blade.

When the blade is sharp, it cuts hair more easily. That means you can take fewer strokes, and it will glide on your skin better—leading to smoother shaving.

The Razor® dimensions are 4.05 x 1.57 x 0.39 inches or 10.3 x 4 x 1 cm.